 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 1 2014.8 e 1mm pitch, board to wire lock connector df50 series features 1. it provides clear tactile click and secure mating locking function and contact mating occur simultaneously, for a clearer tactile click.(fig.1) 2. robust structure resistant to wrenching forces thick and robust housing wall provides higher strength against cracking. insertion depth for mating housings protects against wrenching.(fig.2) 3. robust and reliable lance structure high lance strength by mating with crimp contact on the surface.(fig.3) 4. ensured adsorption area eliminates the need for adsorption cap. adequate adsorption area is ensured despite the small size, allowing for automatic mounting without adsorption cap. (*specifications for adsorption cap may be provided according to your requirements) 5. insulation outer diameter 0.9mm, compatible with awg#28 despite 1 mm pitch, it is compatible with 0.9mm, ul1061awg#28 cable ( 0.1277) it provides clear tactile click and secure mating robust structure resistant to wrenching forces robust and reliable lance structure 4 j n v m u b o f p v t u j n j o h p g m p d l j o h g v o d u j p o b o e d p o u b d u n b u j o h q s p w j e f t b d m f b s f s u b d u j m f d m j d l it is possible to visually inspect the assembled lance. the lance mates with the crimp contact on the surface. timing of locking function insertion depth for mating protects against wrenching. thick and robust outer wall provides higher strength and prevents cracking. fig.1 fig.2 fig.3 2 df50 series 1mm pitch, board to wire lock connector product specifications ratings current rating 1a operating temperature range operating humidity range -35 to + 85? (note 1) 20 to 80% voltage rating ac/dc 100v storage temperature range storage humidity range -10 to + 60? (note 2) 40 to 70% (note 2) items speci cations conditions 1. insulation resistance 500m?min. 100v dc 2. withstand voltage no ashover or breakdown 300v ac/1min. 3. contact resistance 30m?max. 20mv max., at 1 ma. 4. vibration no electrical discontinuity of 1? or longer frequency 10-55 hz, single amplitude of 0.75 mm 3 directions, 10 cycles in each direction. 5. shock no electrical discontinuity of 1? or longer acceleration: 490m/s 2 for 11ms, half sine wave in 3 directions, 3 times for each direction 6. humidity contact resistance: 50m?max. insulation resistance: 100m?min. temperature: 40??; humidity: 90 to 95%, left for 96 hours 7. temperature cycles contact resistance: 50m?max. insulation resistance: 500m?min. (-55?: 30 min. 5 to 35?: 2 to 3 min. 85?: 30 min. 5 to 35?: 2 to 3 min.) 5 cycles 8. durability contact resistance: 50m?max. 30 times (number of insertion and withdrawal) 9. resistance to soldering heat no deformation of components affecting performance. re ow: according to the recommended temperature pro le hand soldering: 350? for 3 to 4 sec. (note 1) including the temperature rise by current. (note 2) apply to the condition of long term storage for unused products before pcb on board. after pcb board, operating temperature and humidity range is applied for interim storage during transportation. materials product part materials color / treatment ul regulation pin header (on the board side) insulator lcp black ul94v-0 contact brass gold plating --------- metal tting brass (note 1) tin plating --------- locking metal tting (df50) stainless steel --------- --------- crimp socket insulator pbt black (df50a) ul94v-0 white (df50s) crimp contact contact phosphor bronze gold plating --------- (note 1) phosphor bronze is applied a material for only to the single-row straight pin header. product number structure connector df 50 ? * dp ?1v ** ^ _ ` a b c d e crimp contact df 50 ? 2830 scf a ^ _ ` f ) ) d mounting style / wiring type v: smt straight type h: smt right angle type c: crimp socket e speci cations 51: smt embossed packaging 52: smt embossed packaging (with cap, df50) f applicable wire size 2830: awg#28, 30 3032: awg#30, 32 (under development) ) packaging style scf: socket contact reel ) plating speci cations a: gold plating ^ series name: df _ series no.: 50 ` form type: blank: double-row pin header s: double-row crimp socket a: single-row a number of contacts : 20, 30, 40, 50 (double-row) : 2 to 16 (single-row) b connector type dp: double-row pin header ds: double-row crimp socket p: single-row pin header s: single-row crimp socket c contact pitch: 1mm 3 df50 series 1mm pitch, board to wire lock connector [speci? cation number : ** , ( ** ) ] (51): gold plating, embossed packaging (52): gold plating, embossed packaging, with adsorption cap double-row straight pin header b recommended pcb dimensions *: no. of contacts unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1v (**) 665-0019-3 ** 20 13.18 9 14.2 28.4 32 38.4 32.4 df50-30dp-1v (**) 665-0001-8 ** 30 18.18 14 df50-40dp-1v (**) 665-0005-9 ** 40 23.18 19 20.2 40.4 44 50.4 44.4 df50-50dp-1v (**) 665-0011-1 ** 50 28.18 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 6 6 6 " 6 8 % # & 9 % # & & # , * % # & & ' % # & ) % # & % # ' % # % * g % # , * % # & % & # * % # & % ' % # & : % # ( 6 o s f f m j o h e j s f d u j p o $ p o u b d u / p ' # ( . * 8 z c i z g d [ v y h d g e i ^ d c v g z v f max g +2 0 ?801 ?3802 product label ?1.5 sprocket hole far side unreeling direction r1 ?130.2 ?210.8 20.5 e 2 & y 7 6 , # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` - # ( * % # . % # % * % # - * b > c & # + % # % * ) % # % * & # + % # % * 7 % # % * % # + % # % * e 2 & % # % * % # , % # % * & # - % # % * 8 d c i v x i c d # ' 8 d c i v x i c d # 8 d c i v x i c d # " & 8 d c i v x i c d # & & # , . % # , ' 4 df50 series 1mm pitch, board to wire lock connector double-row right angle pin header [speci? cation number: ** , ( ** )] (51): gold plating, embossed packaging unit : mm part no. hrs no. no. of contacts a b c d e f g df50-20dp-1h(**) 665-0016-5 ** 20 14.35 9 14.2 28.4 32 38.4 32.4 df50-30dp-1h(**) 665-0015-2 ** 30 19.35 14 20.2 40.4 50.4 44.4 df50-40dp-1h(**) 665-0014-0 ** 40 24.35 19 df50-50dp-1h(**) 665-0013-7 ** 50 29.35 24 (note) please place orders for embossed packaged products by the multiple of the number of reels. (600 pcs/reel) 8 d c i v x i c d # & 8 d c i v x i c d # " & 8 d c i v x i c d # ' 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` . - # + + & # ' * % # % * & # , * % # % * & # + % # % * ) # & % # % * & # + % # % * 7 % # % * 8 d c i v x i c d # ? 8 d c i v x i c d # ' % # + % # % * e 2 & % # % * 8 d c i v x i c d # " & 8 d c i v x i c d # & % # . % # % * & # - % # % * ' # ( , * % # . ) b recommended pcb dimensions b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions 7 7 7 " 7 8 % # & 9 % # & & # , * % # & & + % # & * % # ' % # % * g % # , * % # & % & # * % # & % ) % # & ' % # & : % # ( j c g z z a ^ c \ y ^ g z x i ^ d c product label f max g +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side unreeling direction *: no. of contacts 5 df50 series 1mm pitch, board to wire lock connector * # + , 8 d c i v x i c d # & 8 d c i v x i c d # 6 e 2 & 7 8 d c i v x i c d # & b v g ` 8 , # % * single-row straight pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1v (**) 665-1001-3 ** 2 5.25 1 5 df50a-3p-1v (**) 665-1004-1 ** 3 6.25 2 6 df50a-4p-1v (**) 665-1006-7 ** 4 7.25 3 7 df50a-5p-1v (**) 665-1008-2 ** 5 8.25 4 8 df50a-6p-1v (**) 665-1010-4 ** 6 9.25 5 9 df50a-7p-1v (**) 665-1012-0 ** 7 10.25 6 10 df50a-8p-1v (**) 665-1014-5 ** 8 11.25 7 11 df50a-9p-1v (**) 665-1016-0 ** 9 12.25 8 12 df50a-10p-1v (**) 665-1017-3 ** 10 13.25 9 13 df50a-11p-1v (**) 665-1019-9 ** 11 14.25 10 14 df50a-12p-1v (**) 665-1021-0 ** 12 15.25 11 15 df50a-13p-1v (**) 665-1023-6 ** 13 16.25 12 16 df50a-14p-1v (**) 665-1025-1 ** 14 17.25 13 17 df50a-15p-1v (**) 665-1027-7 ** 15 18.25 14 18 df50a-16p-1v (**) 665-1029-2 ** 16 19.25 15 19 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) *: no. of contacts [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # & 8 d c i v x i c d # % # , % # % * & # . % # % * ( # & * % # % * ) # , % # % * ' # ) % # % * e 2 & % # % * % # + % # % * 7 % # % * & # , % # , ' 6 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1v to df50a-8p-1v (number of contacts: 2 to 8) ? df50a-9p-1v to df50a-16p-1v (number of contacts: 9 to 16) j c g z z a ^ c \ y ^ g z x i ^ d c 6 6 & ' % # & ' % # & & & # * % # & ' ' # ' * % # ' % & # , * % # & ) % # & ' ) & # * % # & % a-a unreeling direction a a 0.20.05 320.3 28.40.1 14.20.1 40.1 20.1 ?1.5 120.1 1.750.1 r0.75 +0.1 0 +0.1 0 unreeling direction ?1.5 sprocket hole far side product label 20.5 ?3802 ?801 24.4 +2 0 30.4max r1 ?210.8 ?130.2 b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions product label unreeling direction 38.4max 32.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 ?1.5 sprocket hole far side 7 df50 series 1mm pitch, board to wire lock connector single-row right angle pin header b recommended pcb dimensions unit : mm part no. hrs no. no. of contacts a b c df50a-2p-1h (**) 665-1031-4 ** 2 6.81 1 6 df50a-3p-1h (**) 665-1032-7 ** 3 7.81 2 7 df50a-4p-1h (**) 665-1033-0 ** 4 8.81 3 8 df50a-5p-1h (**) 665-1034-2 ** 5 9.81 4 9 df50a-6p-1h (**) 665-1035-5 ** 6 10.81 5 10 df50a-8p-1h (**) 665-1037-0 ** 8 12.81 7 12 df50a-10p-1h (**) 665-1039-6 ** 10 14.81 9 14 df50a-12p-1h (**) 665-1041-8 ** 12 16.81 11 16 df50a-16p-1h (**) 665-1045-9 ** 16 20.81 15 20 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) [speci? cation number: ** , ( ** ) ] (51): gold plating, embossed packaging 8 d c i v x i c d # 8 d c i v x i c d # & e 2 & 6 7 8 , # + 8 d c i v x i c d # & b v g ` + # % - 7 % # % * e 2 & % # % * % # + % # % * & # . % # % * & # * & % # % * , # ( & % # % * * # + , % # % * ' # ) % # % * 8 d c i v x i c d # 8 d c i v x i c d # & ' # ' & # & , * *: no. of contacts 8 df50 series 1mm pitch, board to wire lock connector ? df50a-2p-1h to df50a-6p-1h (number of contacts : 2 to 6) ? df50a-8p-1h to df50a-16p-1h (number of contacts : 8 to 16) b emboss tape dimensions (jis c 0806 compliant) b emboss tape dimensions (jis c 0806 compliant) b reel condition dimensions b reel condition dimensions j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ' ) ' ' # ' * & & # * % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % product label ?1.5 sprocket hole far side unreeling direction 30.4 max 24.4 +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 j c g z z a ^ c \ y ^ g z x i ^ d c 8 8 8 " 8 ; % # ( : % # & 9 % # & & # , * % # & & ' % # & ) % # & ' % # & & # * % # & % % # ' % # % * product label ?1.5 sprocket hole far side unreeling direction g max h +2 0 ?801 ?3802 20.5 r1 ?130.2 ?210.8 unit : mm part no. hrs no. no. of contacts d e f g h df50a-8p-1h (**) 665-1037-0 ** 8 14.2 28.4 32 38.4 32.4 df50a-10p-1h (**) 665-1039-6 ** 10 df50a-12p-1h (**) 665-1041-8 ** 12 df50a-16p-1h (**) 665-1045-9 ** 16 20.2 40.4 44 50.4 44.4 (note) please place orders for embossed packaged products by the multiple of the number of reels. (1,000 pcs/reel) 9 df50 series 1mm pitch, board to wire lock connector double-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50s-20ds-1c 665-0020-2 00 20 12.28 9 df50s-30ds-1c 665-0021-5 00 30 17.28 14 df50s-40ds-1c 665-0022-8 00 40 22.28 19 df50s-50ds-1c 665-0012-4 00 50 27.28 24 note) sold in 100 pcs/pack. single-row crimp socket unit : mm part no. hrs no. no. of contacts a b df50a-2s-1c 665-1002-6 00 2 3.95 1 df50a-3s-1c 665-1005-4 00 3 4.95 2 df50a-4s-1c 665-1007-0 00 4 5.95 3 df50a-5s-1c 665-1009-5 00 5 6.95 4 df50a-6s-1c 665-1011-7 00 6 7.95 5 df50a-7s-1c 665-1013-2 00 7 8.95 6 df50a-8s-1c 665-1015-8 00 8 9.95 7 df50a-9s-1c 665-1100-5 00 9 10.95 8 df50a-10s-1c 665-1018-6 00 10 11.95 9 df50a-11s-1c 665-1020-8 00 11 12.95 10 df50a-12s-1c 665-1022-3 00 12 13.95 11 df50a-13s-1c 665-1024-9 00 13 14.95 12 df50a-14s-1c 665-1026-4 00 14 15.95 13 df50a-15s-1c 665-1028-0 00 15 16.95 14 df50a-16s-1c 665-1030-1 00 16 17.95 15 (note) sold in 100 pcs/pack. 7 e 2 & 6 8 d c i v x i c d # " & 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # 8 d c i v x i c d # ' = g h b v g ` 8 6 k c d # - # * + 7 e 2 & 6 8 d c i v x i c d # & 8 d c i v x i c d # & b v g ` 8 d c i v x i c d # + # - * + *: no. of contacts *: no. of contacts 10 df50 series 1mm pitch, board to wire lock connector crimp contact part no. hrs no. type quantity treatment df50-2830scfa 665-0002-0 00 reel contact 30,000 pcs/reel gold plating df50k-2830scfa 665-0017-8 00 DF50-3032SCFA under development --------- --------- --------- (note) as this product is sold 30,000 pcs/reel, please place orders by the multiple of the number of reels. part no. hrs no. recommended wire cable name conductor size (core structure) diameter of the wire df50-2830scfa 665-0002-0 00 ul1061 awg#28 (7 / 0.127mm) 0.8 to 0.9mm awg#30 (7 / 0.102mm) df50k-2830scfa 665-0017-8 00 ul1571 awg#28 (7 / 0.13mm) 0.58mm (note) please contact our sales department when you are using wires other than applicable wires. applicable wire (tinned annealed copper wire) strip length 1.3 to 1.7mm b applicable crimping tool type part no. hrs no. applicable contact applicator ap105-df50-2830s 901-4616-0 df50-2830scfa press body cm-105 901-0005-4 --------- hand tool ht305/df50-2830hc 902-4634-8 df50-2830scfa contact pull-out tool df-c-po(b) 550-0179-2 (note) problems caused by tools other than our speci ed ones are out of warranty events. % # + ( % # & ' & # ) ' # , ) & # ' * # % * % # - & # . % # * ( ) ) # + b application pattern double row single row vertical horizontal 11 df50 series 1mm pitch, board to wire lock connector 1. recommended temperature pro le (compatible with lead-free soldering) [applicable conditions] 1.peak temperature: a maximum of 250? for no more than 10 seconds 2.heating unit: no less than 220? for no more than 60 seconds 3.preheating unit: 150 to 180? for 90 to 120 seconds 4.number of times: no more than 2 times * measurement is conducted at the contact lead part as it may change depending on the conditions such as solder paste types, manufacturers, pcb size, and other soldering materials, please fully check the mounting conditions before use. (note 1) this temperature profile is a recommended value. 2. recommended hand soldering conditions temperature of soldering iron: 350?0?, soldering time: 3 to 4 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness: 0.1mm, aperture ratio: 100% 4.warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5.cleaning conditions ipa cleaning is allowed. (cleaning is not recommended because cleaning may change the push/pull feeling etc. please contact us when you use other cleaning agents. ) 6.precautions /? when inserting a crimp contact into a crimp socket, do not insert it at a slanted angle in order to maintain the reliability of its performance. /? please refrain from pushing/pulling operation when the pcb is not mounted. it may cause breakage, contact deformation, etc. /? please refrain from pushing/pulling operation with wires in your hand. it may cause damage. /? during hand soldering, do not apply flux which will cause flux oozing on connector. /? this product may have a little difference in its molded color depending on the production lot, but the difference doesn't have any influence on the performance. /? please refer to the operation manual for more information. /? please refer to the documents "cable assembly procedure", "crimp condition"and "crimp quality standards" for the cable assembly procedure. b precautions time (sec) 180 ? 100 150 200 250 220 ? pre-heating time soldering time max 250 ? 90 C 120sec 60secmax 10secmax temperature ? 0 12 df50 series 1mm pitch, board to wire lock connector the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 08/2014. contents are subject to change without notice for the purpose o f improvements. usa: hirose electric (u.s.a.), inc. san jose office 3255 scott boulevard, building 7, suite 101 santa clara, ca 95054 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : +1-805-522-7958 fax : +1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : +49-711-4560-02-1 fax : +49-711-4560-02-299 http://www.hirose.de germany: hirose electric europe b.v. nuernberg office muggenhofer str. 136 90429 nuernberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.de india: hirose electric singapore pte. ltd. bangalore liaison office unit no.03, ground floor, explorer building international tech park whitefield road, bangalore 560066 karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose-singapore.com.sg singapore: hirose electric singapore pte. ltd. 10 anson road #26-1, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hiroseeurope.com united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose-china.com.cn china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : +82-31-496-7000,7124 fax : +82-31-496-7100 http://www.hirose.co.kr india: hirose electric singapore pte. ltd delhi liaison office suite no. 606 5th floor sb tower 1a/1 sector 16 a filmcity noida 201301 uttar pradesh-india phone : +91-120-4804917 fax : +91-120-4804949 http://www.hirose.com/sg/ malaysia: hirose electric singapore pte. ltd (representative office) 1-10-07, suntech @ penang cybercity (1164),lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? |
Price & Availability of DF50-3032SCFA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |